High lift garage door kits are a popular choice for homeowners looking to maximize the vertical space in their garages. By raising the door closer to the ceiling, these kits provide additional clearance for taller vehicles and create more storage space. If you’re considering installing a high lift garage door kit, this comprehensive guide will walk you through the process step by step.
Assess Your Garage Door and Workspace
Before you begin installing a high lift garage door kit, carefully inspect your existing garage door and the available workspace. Ensure that your garage door is in good condition and structurally sound. Clear any clutter or obstacles from the area to create a safe and organized workspace.
Gather the Necessary Tools and Materials
To install a high lift garage door kit, you’ll need the following tools and materials:
High lift conversion kit (including tracks, drums, cables, and brackets)
Wrench set
Socket set
Power drill
Measuring tape
Level
Ladder or scaffolding
Safety glasses and gloves
Read and Understand the Installation Instructions
Every high lift garage door kit comes with specific installation instructions provided by the manufacturer. Take the time to thoroughly read and understand the instructions before proceeding. Familiarize yourself with the components of the kit and the necessary steps involved in the installation process.
Begin by Detaching the Existing Door
To install the high lift kit, you’ll need to detach the existing garage door. Start by disconnecting the door from the opener by pulling the emergency release cord. Carefully raise the door manually until it is fully open and secure it in place with clamps or locking pliers.
Remove the Existing Tracks and Hardware
Next, remove the existing tracks and hardware from the garage door. Use a wrench or socket set to loosen and remove the bolts and screws holding the tracks in place. Take care when removing the hardware to avoid any damage to the door or surrounding area.
Install the High Lift Tracks and Brackets
Follow the manufacturer’s instructions to install the high lift tracks and brackets. Begin by attaching the vertical tracks to the wall, ensuring they are plumb and level. Install the horizontal tracks, connecting them to the brackets securely. Double-check the alignment and make any necessary adjustments.
Mount the High Lift Drums and Cables
Attach the high lift drums to the torsion shaft and secure them in place. Install the lift cables, ensuring they are properly connected to the drums and the bottom brackets. Refer to the installation instructions for the correct cable routing and tensioning procedures.
Adjust the Spring Tension
High lift garage door kits may require adjustments to the spring tension system. Follow the manufacturer’s guidelines to adjust the tension of the springs accordingly. This step is crucial for the proper and safe operation of the garage door.
Test the Door’s Operation
Once the high lift kit is installed, carefully test the operation of the garage door. Open and close the door several times to ensure smooth and balanced movement. Check for any binding or unusual noises and make any necessary adjustments.
Perform Regular Maintenance
To ensure the longevity and optimal performance of your high lift garage door, perform regular maintenance. Lubricate the moving parts, inspect the cables and springs for wear, and address any issues promptly.
By following this comprehensive guide, you can successfully install a high lift garage door kit. However, if you’re unsure with any step of the process, we will assist you with installation. With the additional vertical space provided by the high lift kit, you can enjoy the benefits of improved storage capacity and accommodate taller vehicles in your garage.
English (United States) 
English (Canada) 
Spanish (Peru) 
Spanish (Mexico) 
German 
Russian 
French